Introduction, Determine module compatibility, Operational modes – Rockwell Automation 1732E-OB8M8SR EtherNet/IP Dual Port 8-Point SOE Input and Scheduled Output Modules UM User Manual
Page 63: Module, Chapter
Rockwell Automation Publication 1732E-UM003B-EN-E - March 2014
53
Chapter
8
Specific Features of the 1732E-IB8M8SOER
Sequence of Events Input Module
Introduction
This chapter describes the features specific to the 1732E Sequence of Events
Input module.
These features are configurable through the RSLogix 5000 software.
Determine Module
Compatibility
Primarily, the Sequence of Events Input module 1732E-IB8M8SOER is used to
interface to sensing devices and detect whether they are ON or OFF and to
timestamp ON and OFF transitions. The module converts ON/OFF signals
from user devices to appropriate logic level for use in the processor. Typical input
devices include:
• auxiliary contacts
• limit switches
When designing a system using this module, you must consider:
• the voltage necessary for your application
• whether you need a solid state device
• current leakage
• if your application should use sinking or sourcing wiring.
For more information on compatibility of other Rockwell Automation products
to modules, see the I/O Systems Overview, publicat
.
Operational Modes
The 1732E-IB8M8SOER input module operates in FIFO and Per Point modes:
Topic
Page
Determine Module Compatibility