Rockwell Automation 1732E-OB8M8SR EtherNet/IP Dual Port 8-Point SOE Input and Scheduled Output Modules UM - Manual (Page 26)

16 Rockwell Automation Publication 1732E-UM003B-EN-E - March 2014
Chapter 3 Use the Modules in an ArmorBlock System
Chapter Summary and
What’s Next In this chapter, you learned about the differences between this module and other
EtherNet/IP ArmorBlock I/O modules. The next chapter describes how to
install and wire your module.
Using RSLogix 5000 software The I/O configuration portion of RSLogix 5000 software, v18 or greater, generates the
configuration data for each module.
Configuration data is transferred to the controller during the program download and
subsequently transferred to the appropriate modules.
Modules are ready to run as soon as the configuration data has been downloaded.
Configure all modules for a given controller using RSLogix 5000 software and download
that information to the controller.
Concept Description