Rockwell Automation 1734-SSI POINT I/O Synchronous Serial Interface Absolute Encoder Module User Manual User Manual
Page 12
Advertising
Publication 1734-UM007D-EN-P - December 2005
1-4 Install the Module
1. Using a bladed screwdriver, rotate the keyswitch on the
mounting base clockwise till the number required for the type of
module being installed aligns with the notch in the base.
1734-SSI - Position 2
2. Make sure the DIN-rail locking screw is in the horizontal
position, noting that you cannot insert the module if the locking
mechanism is unlocked.
3. Insert the module straight down into the mounting base and
press to secure, locking the module into place.
Turn the keyswitch to align
the number with the notch.
Notch
(Position 3 Shown)
44009
Make sure the DIN-rail
locking screw is in the
horizontal position.
44101
24VDC
Source
Output
Module
Status
Network
Status
1734
OB4E
NODE:
0
1
2
3
44012
Advertising