Rockwell Automation 1734-SSI POINT I/O Synchronous Serial Interface Absolute Encoder Module User Manual - Manual (Page 41)

Publication 1734-UM007D-EN-P - December 2005
Configure Modules in RSLogix 5000 Software A-3
Work with the Feedback
Dialog Follow these procedures to complete entries for the Feedback dialog.
1. From the General dialog, click Feedback to display the
Feedback dialog.
2. From the Feedback dialog, complete entries, referring to the
table.
3. From the Feedback dialog, complete one of these.
• Click OK to save changes and close the dialog.
or
• Click Cancel to return to default values.
or
• Click Apply to save changes you made on any of the dialogs
and continue to display the dialog, noting that you enable the
Apply button when you make changes to any of the dialogs.
or
• Click another tab at the top of dialog.