Rockwell Automation 1734-SSI POINT I/O Synchronous Serial Interface Absolute Encoder Module User Manual - Manual (Page 7)

1 Publication 1734-UM007D-EN-P - December 2005
Preface
Purpose of This Manual Read this manual for information about how to install, configure, and
troubleshoot your module.
Who Should Use This
Manual You must be able to use RSNetWorx software or similar configuration
software to set up and calibrate these modules. You must have the
capability to download and use electronic data sheet files.
In this manual, we assume you know how to do perform these tasks.
If you do not, refer to your software user manuals or online help
before attempting to use these modules.
For This Information See
Install the Module Chapter 1
Configure the Module Chapter 2
Communicate with Your Module Chapter 3
Operate Your Module Chapter 4
Diagnose Problems Chapter 5
Configure Modules in RSLogix 5000 Appendix A