Rockwell Automation 1734-APB Point I/O Profibus Adapter Module - Manual (Page 17)

Publication 1734-UM005B-EN-P - June 2001
Installing the PROFIBUS Adapter 2-3
Adapter
Status
PROFIBUS
Status
PointBus
Status
1734-APB
Field
Power
System
Power
0 1
4. Set the node address using the 2-position thumbwheel switch.
Valid settings range from 01 to 99. Press the + or - buttons to
change the numbers.
5. Slide the safety end cap (9) up to remove. This exposes the
backplane and power interconnections.
ATTENTION
!
Do not discard the safety end cap. Use this end cap
to cover the exposed interconnections on the last
mounting base on the DIN rail. Failure to do so
could result in equipment damage or injury from
electric shock.
Network Node
Address Thumbwheel
Press either the + or -
buttons to change the
number
Safety end cap