Rockwell Automation 1734-APB Point I/O Profibus Adapter Module - Manual (Page 36)

Publication 1734-UM005B-EN-P - June 2001
3-12 Configuring the POINT I/O System
If you select “Hold Last State,” the module outputs are frozen in their
current state if power to the module is lost. If you select “Idle Value,”
you need to define the Idle Value parameter. Possible settings are:
digital modules - ON/OFF; analog modules - any value within a
predefined range.
Enter the value you wish to
use.
(Click on “OK” to continue.)
Module parameters
Select the “Idle Value”
parameter.
(Click on “OK” to continue.)