Rockwell Automation 2706-P42_P43_P44_P72_P74_P92_P94 InView Marquee Message Display User Manual - Manual (Page 32)

Publication 2706-UM016D-EN-P - March 2006
1-24 Install InView Marquee Message Display
Dimensions for 2706-P22R Display
Electrical Connections for
2706-P22R Display The InView display requires 18 to 30V dc, 0.5 A at 18V dc.
InView P22R Power Connection
337.3
(13.29)
61.7
(2.43)
83.8
(3.30)
365.0 (14.357)
111.3
68.8
(2.71) with fuse
(4.38)
All dimensions are in millimeters (inches)
ATTENTION
Before making power connections, make sure that
the power is turned off. Improper wiring of the
power connections may result in personal injury or
damage to the InView display. Make sure the area
around the panel cutout is clear. Make sure metal
cuttings or debris did not enter any components
that may have been installed in the panel.
IMPORTANT
To satisfy all agency requirements and ensure
proper operation, power this product using a
24V dc, class 2 SELV power supply.
TIP
Use a small screwdriver to remove the terminal
block’s header to ease product wiring.