3 - serial ascii communications, Use a plc5 out channel zero, Chapter 3 – Rockwell Automation 2706-P42_P43_P44_P72_P74_P92_P94 InView Marquee Message Display User Manual User Manual
Page 61: Serial ascii communications, Use a plc5 out channel zero -1, Chapter
Advertising
1
Publication 2706-UM016D-EN-P - March 2006
Chapter
3
Serial ASCII Communications
Use a PLC5 out Channel
Zero
To use a PLC5 out Channel Zero on a display:
1. Create a new application.
2. Set up the channel configuration.
3. Create a file type String (ST).
This is where the user inserts the ASCII/Hex commands.
4. Set up the ladder logic.
ER
0
B3:0
EN
DN
ASCII Write
Channel
0
String Length
0<
Characters Sent
0<
Source
ST9:0
Control
R6:0
0
AWT
1
(End)
Advertising