Use a micrologix out channel zero or one, Use a micrologix out channel zero or one -3 – Rockwell Automation 2706-P42_P43_P44_P72_P74_P92_P94 InView Marquee Message Display User Manual User Manual
Page 63
Advertising
Publication 2706-UM016D-EN-P - March 2006
Serial ASCII Communications 3-3
Use a MicroLogix out
Channel Zero or One
The MicroLogix processor is set-up similar to the SLC processor. They
both use RSLogix500 software to communicate, however the channel
configuration and ladder is slightly different.
With the MicroLogix processor, the user can download with either
channel 0 or 1 and can also write ASCII using channel 0 or 1. In this
example the ASCII is done using channel 1.
ER
0
B3:0
EN
DN
ASCII Write
Channel
1
String Length
0<
Characters Sent
Error
0
0
Source
ST9:0
Control
R6:0
0
AWT
Advertising