Examples of the control-v function, Remove a message on a specific display -9, Examples of the control-v function -9 – Rockwell Automation 2706-P42_P43_P44_P72_P74_P92_P94 InView Marquee Message Display User Manual User Manual
Page 75: Update a variable on all displays -9, Remove a message on a specific display, Update a variable on all displays
Publication 2706-UM016D-EN-P - March 2006
InView Protocol 4-9
Or
Remove a Message on a Specific Display
The following removes message 367 on a display address 4.
Remove a Message on s Specific Display
Examples of the Control-V
Function
This function allows for the updating of variables that are embedded
in messages. If no display address is used, it updates all displays with
the variable data. The following example updates variable 0 in all
displays.
Update a Variable on all Displays
Update variable 0 with the value of 2395 on all displays
Update a Variable on all Displays
Or
Name
[CTRL][T]
MSG #
Backslash
Function
Backslash
Display
address
Return
ASCII
^T
4095
\
1
\
24
^M
Hex
\14
\34\30\39\35
\5C
\31
\5C
\32\34
\0D
Name
[CTRL][T]
MSG #
Backslash
Function
Backslash
Display
address
Return
ASCII
^T
367
\
3
\
4
^M
Hex
\14
\33\36\37
\5C
\33
\5C
\34
\0D
Name
[CTRL][V]
Variable Data
Return
ASCII
^V
2395
^M
Hex
\16
\32\33\39\35
\0D
Name
[CTRL][V]
Variable Data
Backslash
Variable #
Return
ASCII
^V
2395
\
0
^M
Hex
\16
\32\33\39\35
\5C
\30
\0D