Metrohm NIRS XDS Interactance OptiProbe Analyzer - Manual (Page 26)

24 ▪▪▪▪▪▪▪
13. Install the ferrite onto the RJ-45 cable as
shown. This is detailed in the sheet
attached to the ferrite.
This ferrite is required for CE Emissions
(EMI) compliance. All users in the European
Community are required to install this
ferrite.
14. When all the above assembly is finished,
turn on the power switch on the
monochromator. It is located on the lower
surface, on the right-hand side as shown.
The monochromator performs some
initialization tests, which take a moment.
Some noises will be heard as items find
their initial positions. This is normal.
15. Prepare to establish communication from
Vision to the XDS instrument. This is
detailed in Section 6.0, Vision Software.
This completes assembly of the XDS OptiProbe Analyzer.