Metrohm NIRS XDS Interactance OptiProbe Analyzer - Manual (Page 61)

▪▪▪▪▪▪▪ 59
Gently position the probe in contact with the WSR
wavelength standard as shown.
Do not press the probe on the quartz window, as this
may damage the surface.
When the test is complete, a spectrum of the standard is shown in the upper right quadrant of the
screen. A tabular report is shown in the lower right quadrant, giving each peak, its nominal position
and its measured position. The difference from nominal, and the repeatability of wavelength peak
positions are calculated.