Banner EZ-SCREEN­ Safety Light Curtain Systems - Manual (Page 17)

P/N 133487
15
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Overview
P/N 112852 rev. F
15
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
EZ-SCREEN
Instruction Manual
15
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Components and Specifications
Model Description
LAT-1-SS
Self-contained visible-beam laser tool for aligning any EZ-SCREEN
14 mm and 30 mm emitter/receiver pair. Includes retroreflective target
material and mounting clip.
EZA-LAT-SS Replacement adaptor (clip) hardware for SLS.. models
EZA-LAT-2 Clip-on retroreflective LAT target
BRT-THG-2-100 2" retroreflective tape, 100'
BT-1 Beam Tracker
Alignment Aids
EZ-LIGHT™ for EZ-SCREEN
®
Provides clear, 360° indication of the EZ-SCREEN receiver’s output status. Use with a
CSB splitter cable and optional DEE2R double-ended cables (see page 9). See data
sheet 121901 for more information.
LAT-1
* Available in a kit that includes one M18 EZ-LIGHT, one SMB18A mounting bracket, and hardware for mounting to the side channel of an EZ-SCREEN housing (kit model
number EZA-M18RGX8PQ8).
Models Construction Connector LED Function Inputs
M18RGX8PQ8
(See Note below*)
Nickel-plated brass housing,
thermoplastic dome,
M18x1 thread mount
Fully encapsulated, IP67
8-pin
Euro-style
integral QD
Red/Green
indication follows
OSSD output of
the EZ-SCREEN
receiver
ON Red:
Power ON
Beam Blocked
or Lockout
ON Green:
Power ON
Beam Clear
PNP
(Sourcing)
T18RGX8PQ8
Thermoplastic polyester
housing, thermoplastic dome,
18 mm mount
Fully encapsulated, IP67
T30RGX8PQ8
Thermoplastic polyester
housing, thermoplastic dome,
30 mm mount
Fully encapsulated, IP67
K30LRGX8PQ8
Polycarbonate housing,
30 mm thermoplastic dome,
22 mm mount
Fully encapsulated, IP67
K50LRGX8PQ8
Polycarbonate housing,
50 mm thermoplastic dome,
30 mm mount
Fully encapsulated, IP67
K80LRGX8PQ8
Polycarbonate housing,
50 mm thermoplastic dome,
flat or DIN mount
Encapsulated electronics, IP67