Banner EZ-SCREEN­ Safety Light Curtain Systems - Manual (Page 29)

P/N 133487
27
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Overview
27
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
EZ-SCREEN
Instruction Manual
Installation and Alignment
Fig ure 3-9. Emit ter and re ceiv er mounting hardware
NOTES:
• EZ-SCREEN sensor brackets are designed to mount
directly to MSA Series stands (Section 2.3), using the
hardware supplied with the stands.
• See Figure 2-1 for mounting bracket dimensions.
EZ-SCREEN Mounting Hardware
(supplied with each emitter and receiver)
Emitters and Receivers 1050 mm and longer also
include swivel center bracket
Sensors are designed to be mounted with up to
900 mm unsupported distance between brackets
(see Section 3.2.1).
Side-Mounted
(Two center brackets
may be substituted)
End-Mounted
Bracket
Clamp