Brady 3481 - Manual (Page 107)

97
Printing Specifications (continued)
Print Length Range:
with an optional cutter:
with an optional peel &
present mechanism:
.25” – 99” (6.4 mm – 2514.6 mm) 2461&3481
.25” – 55” (6.4 mm – 1397 mm) 6441
1.25” – 99” (31.8 mm – 2514.6 mm) 2461&3481
1.25” – 55” (31.8 mm – 1397 mm) 6441
1.50” – 99” (38 mm – 2514.6 mm) 2461&3481
1.50” – 55” (38 mm – 1397 mm) 6441
Print Justification: Left
Flash Memory: 1 MB 2461
2 MB 3481&6441
SDRAM Memory: 8 MB 2461
16 MB 3481&6441
7.1 Media and Ribbon Requirements
Media Types: Roll-Fed, Die-Cut, Continuous, and Fan-Fold. Flat
on the printable side with no more than .0007”
(.018 mm) protrusions on the opposite side.
Media Roll Capacity
*
: 8” (203 mm) outer diameter
Media Core: 1.5” or 3.0” (38 mm or 76.2 mm) inner diameter
Ribbon Core: 1.010”
±
.006” (25.6 mm
±
.2 mm) inner diameter.
Core not to protrude beyond ribbon edge.
Ribbon Width Range
**
: 1.0” – 4.5” (25.4 mm – 114.3 mm)
Ribbon Length
**
: 1968’ (600 meters) maximum
*
Wound out labels only.
**
Coated side ‘in’ or ‘out’ not interchangeable, dependent upon the Ribbon Supply Hub
type; the ribbon width to slightly exceed label width (including backing material).