Brady 3481 - Manual (Page 64)

54
4.2 Display Messages
The printer displays several different types of information (if not in the menu
system or Quick Test Mode):
Ø User Prompts and Condition Messages (also see Section 4.1.1 for a listing
of the Enter/Exit Prompts)
Ø Application and Boot Loader Updating Messages (see Section 5.4 and 5.5)
Ø Fault and Warning Messages (see Section 6.1)
4.2.1 User Prompts and Condition Messages
User Prompts alert the operator to a required action. Condition Messages are
used to indicate an operational state.
User Prompts and Condition Messages
Displayed Message Description Condition(s)
The printer is trying to
clear a fault condition. Occurs when the FEED key
is pressed after the
correction of a fault.
A media calibration is
being performed. The FEED key was pressed
and held.
The CANCEL or
TEST key was pressed
during a batch job. The current print batch will
be cancelled if ENTER is
pressed; the remaining
labels will not be printed.
The printer is paused
or offline. The printer is in a paused
condition.
A label is awaiting
removal. The Present Sensor option
is enabled and a label
blocks the sensor. Remove
the label to continue
printing.