Brady 3481 - Manual (Page 72)

62
Standard Calibration (continued)
Step Operator Action Displayed Message Comment
3 Press the key to
enter the Media Settings
menu. See Section 4.1.2
for menu layout.
4 Press the key
and scroll to ‘Sensor
Calibration’. Press the
key to abort this
procedure.
5 Press the
key.
You are beginning
the standard
calibration
procedure.
6
Press the
key.
Remove the media from
the Media Sensor then
press any key.
This sets the
parameter for the
‘empty’ value.
Where ‘yyy’ is a
numerical value
representing the
current sensor
reading.