Brady 3481 - Manual (Page 48)

38
Printer Options (continued)
CUTTER
Used to cut media into separate labels. (The
physical presence of a cutter must be
detected to show the ENABLE/DISABLE
selections.)
ENABLED
Enables label cutting.
² DISABLED
Disables the cutter.
NOT INSTALLED
No cutter is detected.
GPIO PORT
Model dependant option used to interface the
printer to an external controlling device (see
Appendix D).
GPIO
Input control signal is required to print a
label.
ENABLED
Enables external signal control.
² DISABLED
Disables the GPIO.
END OF PRINT
Programmable signal output.
ACTIVE LOW
ACTIVE HIGH
LOW PULSE
HIGH PULSE