Brady 3481 - Manual (Page 52)

42
System Settings (continued)
SET FACTORY DEFAULTS Parameters in this menu listing with the ‘²’
symbol are the designated defaults.
SET FACTORY DEFAULTS
Overwrite the current settings with the
factory default settings or, if selected, will
restore the Factory Setting File.
þ Note: The reset will be automatic. If no
Factory Setting File is used, all menu
settings will be restored except CUSTOM
ADJUSTMENTS, and the media and ribbon
sensor calibrations.
FORMAT ATTRIBUTES
Affects the manner in which overlapping text
and graphics are treated as the label is
printed. Consult the Programmer’s Manual
for details.
TRANSPARENT
Intersecting text strings, images, and bar
codes will not be printed. (An odd number of
overlapping objects will print.)
² XOR
Intersecting text strings, images, and bar
codes print on top of one another.
OPAQUE
Interacting text strings, images, and bar
codes are obliterated by those formatted
last. Each character cell is treated as
opaque.
IMAGING MODE ♦
Instructs the printer whether to pre-image
the label format.
þ Note: This selection can affect the
accuracy of time-stamped labels and label
throughput.
² MULTIPLE LABEL
The printer images multiple labels as
memory permits, achieving the fastest
throughput; however, if time-stamping, the
time will reflect the moment the label is
imaged rather than when actually printed.
SINGLE LABEL
The printer images the next label only after
the previous label has been successfully
printed. Single processing provides time-
stamps that are more accurate, but it slows
label throughput time.