Brady 3481 - Manual (Page 54)

44
System Settings (continued)
þ Note: As indicated, the following menu selections will only appear
according to the model of your printer.
PLUS EMULATION
This instructs the firmware to process
specific DPL data as would the Prodigy
Plus
®
printer without all of the
variations.
ENABLED
This list of exceptions will be updated
with new firmware releases:
• Data Terminator – I 2 of 5 Barcodes
(IDs D, J, and L), the first non-
numeric character processed will
terminate the barcode data field.
• Bar Size – I 2 of 5 Barcode (ID L),
when the bar size is specified greater
than P (25), the size is automatically
decreased to 10.
• Human Readable Fonts – The EAN
and UPC barcodes (IDs B, C, F, G,
M, and N) print a fixed font size.
• The column position, bar code
height, line width, and column offset
commands are interpreted as 200
DPI calculations.
² DISABLED
The above exceptions are disabled.
ALLEGRO EMULATION
This instructs the firmware to process
specific DPL data as would the
Allegro
®
printer without all of the
variations.
ENABLED
The row position is calculated based on
194 DPI.
² DISABLED
The above exception is disabled.
2461 Model