Sindoh M612 User Manual
Page 114
Scanner, Printer and Fax
3-
26
2-Booklet Printing
Using this function, you can do 2-sided printing and then bind the printed pages into a book.
In order to make a booklet, only the following paper can be used. (A4, Letter,)
Open the default settings window and click the print setting tab to change the settings.
Procedure
1
Select Print 2-Booklet in Pages per Sheet.
2
Click Paper Tab to select paper size, paper source and paper type.
3
Click OK or Apply button after completing the print settings.
4
Fold the paper in half and bind it. (You may cut the paper in half and bind it.)
Pages per Sheet
Multiple pages can be printed on one sheet. If the number of pages to be printed is less than that of pages
designated for the sheet, blank pages are printed. The booklet is a special format of 2-up. In booklet printing,
fold output pages to make a book. If poster print is selected in the image driver, “Pages per Sheet” cannot be
selected. Open the basic print setting window to select the print setting tab to change below print settings.