Firmware update, Check rollermark, Firmware update -18 – Sindoh M612 User Manual
Page 160: Check rollermark -18
Settings and changes of each function and additional functions
4-
18
Firmware Update
In order to update the MFP firmware to the latest version, user can select Firmware Update Settings menu in
General Settings and proceed the update.
To update the firmware follow the instruction below.
1
Press 【Settings】button.
2
Press [General Setting] to go to the general setting menu.
3
After moving to [Default Settings], press【▲】,
【
▼】until [Firmware Update] appears, and then press 【OK】.
4
Network is available?] message is displayed on the LCD screen.
5
To update the firmware, press 【OK】.
6
If you do not want to update the firmware, press [Cancel].
Check RollerMark
In order for your scan/copy/Fax jobs you can place a small original on the flatbed and a roller located under
the bottom of Automatic Document Feeder (ADF) can be exposed to the original contact glass. In this case,
you can avoid any roller mark image from the exposed roller by selecting `Yes` in the setting [Check Roller-
Mark], but the roller mark can be scanned together if set `No`.