Sindoh M612 - Manual (Page 198)

Settings and changes of each function and additional functions
4-
56
IP Address Setting
You have to set IP address first for the network print and control. The IP address can be automatically
allocated by DHCP server or manually set by selecting the fixed IP.
Operating the Control Panel
1 Slide the lower part menu bar to the left and press 【Settings】 in the home screen.
2 Press 【General Settings】.
3 Press 【Network Settings】.
4 The first scree is [Wired Network Settings]. Press 【▼】 button at the right side of the screen to move to
[Wireless Network Settings] menu page.
5 Press the menu at the right side of [IP Address Settings], you can select [Manual Settings] or
[Auto Settings]
① IP Automatic Setting: Select [DHCP], and then press 【Save】
② Manual Settings : Select [Manual Settings] and type in IP address, Subnet mask, gateway and DNS
server 1, 2, and then press 【Save】
③ You can enter the addresses by using the number key pad at the right side of LCD screen.
(Must enter all addresses to make the setting and all 12 digit addresses)
The network default settings of this product is set to [Auto Settings] which automatically assigns IP address. In
order to change your current network setting to [Manual settings] use the allocated IP address from consulting
with your network administrator. In case of setting random IP and conflicts with other IP for a different devices
the network is not normaly connected.