Sindoh M612 User Manual
Page 265
5-
39
Maintenance and Troubleshooting
5
Problem
Cause
Solution
Output print is blur and unclear.
Paper is wet.
Change the new paper.
Check if the original document
is yellow or green.
Send the black document.
Copying is recommended.
Improper paper is used.
Use proper paper described in
this manual.
The contrast setting is wrong.
Set the correct contrast setting.
White or black spots are print-
ed.
Improper paper is used.
Use proper paper.
The flatbed or pad is dirty.
Clean up the flatbed or pad.
Regular stains or lines are
printed.
The paper path is dirty.
Test copy several times.
Black lines or stains are printed. Paper is wet.
Change the new paper.
Improper paper is used.
Use proper paper.
The flatbed or pad is dirty.
Clean up the flatbed or pad.
The device has a problem.
Contact the authorized dealer.
The overall output is dark.
The device has a problem.
Contact the authorized dealer.
The edge is dirty.
The platen pad is dirty.
Clean up the platen pad.
Paper is bigger than the original
document. (Zoom: 100%)
Use the same size paper as the
original document.
Paper orientation is different
from document orientation.
Select the paper with the same
orientation or match orienta-
tions between document and
paper.
The output is not reduced to pa-
per.
Select the correct scale that fits
into paper.