ADS Environmental Services Enigma-hyQ QR 775017 A2 - Manual (Page 16)

ADS Enigma/Enigma-Compact/Enigma-hyQ User Manual
12
Programming/Readback of Loggers with the
Communications Case
Inside top of transport case showing optical windows, LEDs, and buttons
The communications case provides the following logger functions:
 Default programming
 Readback
 Program status check
 Readback status check
The communications case can program a set of default logging parameters
into the loggers and readback data from the loggers after recording. It also
allows checking of the programming and readback status of the loggers.
The factory default settings initiate logging at 02:00, 03:00, and 04:00. The
user sets the parameters by which the case will program the loggers through
the PC. Refer to Case Programming on page 23 for more information.
To ensure successful data communication between the case and the loggers,
the tops of the loggers and the optical windows on the case must be clean.
Use the cloth provided in the case for cleaning these surfaces.
Case Optical
Windows (8)
Program
Button (green)
Readback Button
(red)
LEDs (8)
Logger
Optical
Window