ADS Environmental Services Enigma-hyQ QR 775017 A2 - Manual (Page 52)

ADS Enigma/Enigma-Compact/Enigma-hyQ User Manual
48
Find Peak
Clicking on this button moves the cursor on the correlation display to the peak
value, as determined by the software. You also can move the cursor by
clicking on the cursor marker and then dragging it to the left or right using the
mouse. The time delay figure for the cursor position displays above the cursor
marker. Move the cursor in shorter, more precise segments using the left and
right cursor keys.
Zoom Out
Clicking on this button zooms out the correlation display to the maximum
zoom.
Pipework
Note: In Network Mode, you can modify or delete, but not insert,
pipes.
This button displays the Pipe Details window for manually entering pipe
details, modifying existing pipe sections, and deleting pipe sections. The
correct pipe details must be entered before the position of a leak can be
accurately measured or a full leak analysis can be performed. This involves
designating and characterizing the existing sections of pipe between the
loggers. Individual sections of pipe may exhibit different materials or
diameters.
Blank Pipe Details window