ADS Environmental Services Enigma-hyQ QR 775017 A2 - Manual (Page 70)

ADS Enigma/Enigma-Compact/Enigma-hyQ User Manual
66
the network to add pipe data, enter all pipe lengths to ensure that accurate pipe
details will be used in the Analysis screen.
Network screen
Loggers with data have a thick blue border; loggers without data have a thin
grey border.
Network Window – Tools
The menu on the left side of the screen includes the following tools. Selecting
a specific tool displays the corresponding content on the right.
Select
Use this tool to select an item on the network display. For example, select
loggers and drag them to a specific location on a run.
Pipe
Use this to add a new pipe. After clicking on the tool, click and hold on the
starting location of the pipe on the grid, move (while holding down on the
mouse button) the cursor to the final location, and then release the button.
While drawing the pipe, the pipe displays as a dotted line. When the mouse
button is released, the pipe displays as a solid line.
Continue to add new pipes while it is in this mode. A round node displays at
each end of the pipe.