ADS Environmental Services Enigma-hyQ QR 775017 A2 - Manual (Page 36)

ADS Enigma/Enigma-Compact/Enigma-hyQ User Manual
32
Timed Logging
To set the time for Epoch 1, select the hour portion of the Time field and then
designate the desired hour using the corresponding up and down arrows.
Repeat this process for the minute portion of the Time field.
To set the times for epochs 2 and 3, select the appropriate cycle (from 2 to 60
minutes) from the corresponding Interval drop-down list. By default, the
epoch times are 02:00, 03:00, and 04:00 at 60-second intervals.
Note: Confirm that all epoch times are set for the same day; they
must not cross a midnight boundary.
Delayed Logging
To set the time delay before Epoch 1, select the hour portion of the Time field
and designate the desired hour using the corresponding up and down arrows.
Repeat this process for the minute portion of the Time field.
To set the delays between Epochs 1 and 2 and between Epochs 2 and 3, select
the appropriate cycle time (from 2 to 60 minutes) from the corresponding
Interval drop-down list. By default, epochs are 60 seconds in duration with
5-minute delays.
Current Time
This field displays the current PC time in real-time. Selecting the Set to PC
Clock checkbox will synchronize the loggers’ clocks with the PC clock
during programming. To set the loggers’ clocks to another date, deselect the
Set to PC Clock checkbox, click on the drop-down arrow to display the date
selection dialog, and then choose the desired day. To change the time, click
on the time display and enter the appropriate time.