ADS Environmental Services Enigma-hyQ QR 775017 A2 - Manual (Page 62)

ADS Enigma/Enigma-Compact/Enigma-hyQ User Manual
58
Auto Velocity at Out of Bracket
If, during the analysis, a peak displays close to a logger position, but should
display at the end, use the Out-of-Bracket function to compensate for the
inaccurate velocity of sound in the pipe.
Note: Use this function only when a known out-of-bracket condition
exists. To obtain an accurate result using this function, the value
entered for the distance between the sensors must be correct.
The following example uses the default velocity and displays the peak just
inside the limit of the left end of the pipe.
Access and implement the Out-of-Bracket function by right-clicking in the
correlation.