Analysis toolbar – ADS Environmental Services Enigma-hyQ QR 775017 A2 User Manual
Page 48
ADS Enigma/Enigma-Compact/Enigma-hyQ User Manual
44
Analysis Toolbar
The top line of the display identifies the two loggers that were analyzed for
the results and includes several options. The two loggers that were analyzed
to generate the correlation display in blue and red. To change the current
loggers, select the desired loggers from the corresponding drop-down menus.
Analysis toolbar
The top part of the screen displays the Correlation Analysis and peaks that
have been identified. The content below is a graphical representation of the
loggers and the pipe network that exists between the two selected loggers.
Below the Correlation display is the dB/frequency graph. Notice that the leak
position calculation cannot be performed until the pipe details have been
added.
Correlation display
The critical noise values display (in dB) below the time delay graph.