Canon mx860 - Manual (Page 12)

(15) Color button
Starts to make color print, copy, scan, fax, etc.
(16) Hook button
Connects or disconnects the telephone line.
(17) Tone button
In the fax mode, switches to tone dialing temporarily or used to dial with the Numeric buttons, and also
changes the input mode when entering characters.
In the memory card mode, used to crop a part of photo (trimming).
(18) Two-Sided button
Specifies the settings for duplex copying.
(19) (Up) (Down) (Left) (Right) buttons
Scrolls through menu selections and increases/decreases setting values, such as the number of copies.
You can use these buttons when
(Up), (Down), (Right), and (Left) are displayed on the LCD.
Also, the (Left) button cancels the entered character, and the (Right) button enters a space
between characters when entering characters.
(20) OK button
Selects a menu or setting item. See How to Navigate Menus on the LCD .
Resolves an error when printing is in progress or resumes the machine's normal operation after removing
jammed paper or to eject documents remaining in the ADF.
(21) Back button
Cancels operations and returns the LCD to the previous screen.
(22) Change Display button
Switches the image display in the memory card mode to the full-screen display or four-image display.
(23) One-Touch Speed Dial buttons
Used to dial pre-registered fax/telephone numbers or groups with a simple operation.
(24) In Use/Memory lamp
Flashes when sending or receiving faxes, and lights when there are documents saved in the machine's
memory.
(25) Alarm lamp
Lights or flashes orange when an error, such as paper-out or ink-out, occurs.
Note
The machine makes the beep sound when pressing buttons on the Operation Panel.
To change the beep volume, see Machine Settings .
Page top
Page 12 of 997 pages Main Components