Canon mx860 - Manual (Page 369)

1. Auto intensity
Specify whether the intensity is adjusted automatically when copying originals loaded on the
Platen Glass.
When Auto intensity ON is selected, Auto will be displayed in the intensity slide bar on the
Copy screen.
Important
You can change the intensity by pressing the button even when Auto intensity ON
is selected. To enable the auto intensity adjustment again, move the cursor to the center
of the slide bar.
Note
When Auto intensity ON is selected, you cannot copy originals from the ADF. Load the
original on the Platen Glass.
2.
Print date & page no.
Select whether to print the copying date, page number, or not.
Orient
Select the orientation of the original document.
First page no.
Use the button to specify the page number on the first page.
Note
The date registered in the machine is printed. For information on how to register the
date, refer to
Setting Up the Machine .
The date is printed in black at the upper right of the sheet. The page number is printed in
black at the lower center of the sheet.
If you copy onto both sides of the paper with the following settings, the date is printed at
the upper right on the front of paper and at the upper left on the back of paper.
Orient: Portrait/Long-side staple
Orient: Landscape/Short-side staple
The machine can print the page number from 1 to 999.
If Device memory is full. Cannot continue process. Press OK. appears on the LCD when
scanning, select No date & page no..
Page top
Page 369 of 997 pages Setting Items