Scangear (scanner driver) does not start – Canon mx860 User Manual
Page 884
Advertising
Advanced Guide
>
Troubleshooting
>
Problems with Scanning
> ScanGear (Scanner Driver) Does Not Start
ScanGear (Scanner Driver) Does Not Start
Check 1: Make sure that the MP Drivers are installed.
If it is not installed, insert the Setup CD-ROM into the computer's disc drive, then select Custom Install
and install MP Drivers.
Check 2: On the File menu of the application, select Select Source and
select the machine.
Important
Do not select the model name that includes WIA in it.
Note
The operation may differ depending on the application.
Check 3: Start from a TWAIN-compliant application.
Page top
Page 884 of 997 pages
ScanGear (Scanner Driver) Does Not Start
Advertising