Lan settings, Change wlan/lan, Wlan settings – Canon mx860 User Manual

Page 800: Wlan setting list, Lan setting list

Advertising
background image

Advanced Guide

>

Changing the Machine Settings

>

Changing the Machine Settings on the LCD

> LAN settings

LAN settings

Change WLAN/LAN

Activates wired or wireless LAN.

Note

When you change the connection method (wired or wireless), set up the machine according to
the method you will use. For details, refer to your setup manual.

WLAN settings

Selects the setting method for wireless LAN connection.

WPS setting
Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select
Push button method or PIN code method according to the method your access point supports,
then follow the on-screen instructions.
WCN setting
Select when you perform settings for wireless LAN using Windows Connect Now (WCN)
feature. You need a USB flash drive on which settings for wireless LAN are saved.

WLAN setting list

The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.

Items

Setting (IPv4)

Setting (IPv6)

Connection

Active/Inactive

Active/Inactive

SSID

XXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

Communication
mode

Infrastructure

Infrastructure

Channel

XX

XX

Data encryption

Disable/WEP/TKIP/AES

Disable/WEP/TKIP/AES

Network
authentication

Auto/Open system/Shared key/WPA-
PSK/WPA2-PSK

Auto/Open system/Shared key/WPA-
PSK/WPA2-PSK

WEP bit

Disable/128/64

Disable/128/64

IP address

XXX. XXX. XXX. XXX

XXX. XXX. XXX. XXX.

XXX. XXX. XXX. XXX

Subnet mask

XXX. XXX. XXX. XXX

-

Subnet prefix
length

-

XXX

Default gateway

XXX. XXX. XXX. XXX

XXX. XXX. XXX. XXX

MAC address

XX:XX:XX:XX:XX:XX

XX:XX:XX:XX:XX:XX

IPsec Settings

-

Active/Inactive

Security protocol

-

ESP/ESP & AH/AH

Pre-shared key

-

XXXXXXXXXXX

("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)

LAN setting list

The list of wired LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.

Items

Setting (IPv4)

Setting (IPv6)

Connection

Active/Inactive

Active/Inactive

IP address

XXX. XXX. XXX. XXX

XXX. XXX. XXX. XXX.

Page 800 of 997 pages

LAN settings

Advertising