Canon mx860 User Manual
Page 423
Note
The LAN-connected PCs are displayed as "User's name PCs name".
7.
Use the
button to select the document type, then press the
OK
button.
Auto detect
This item is available only when the machine is connected to the computer using a USB cable.
The machine detects the type of the original automatically and the image is saved in the optimized
data.
Proceed to step 9.
Document (platen)
Scans the original on the Platen Glass applying the optimized settings for scanning a document.
Photo (platen)
Scans the original on the Platen Glass applying the optimized settings for scanning a photo.
Document (ADF simplex)
Scan single-sided original in the ADF applying the optimized settings for scanning a document.
Document (ADF duplex)
Scan double-sided original in the ADF applying the optimized settings for scanning a document.
Important
Make sure that the document has been loaded correctly according to the document type that
you have selected. Refer to
Placing Documents
for how to load the original on the Platen Glass
or in the ADF.
Note
When double-sided documents are loaded in the ADF, the document pages are not ejected in
the original order by default. If you want the document pages to eject in the original order, set
Two-sided output setting to Output by page. For details, refer to
Changing the Machine Settings
on the LCD
.
8.
If you have selected a document type other than Auto detect in step 7, use the
button to select the file format, then press the
OK
button.
Save to PC.
The original is scanned and saved.
Save as PDF file.
The original is scanned and saved as a PDF file. This item can be selected when Document
(platen), Document (ADF simplex), or Document (ADF duplex) has been selected on the Document
type screen.
Attach to E-mail.
The original is scanned, and the image is attached to an e-mail using the e-mail application
software.
Open with application.
The original is scanned and displayed on the registered application software.
Page 423 of 997 pages
Saving Scanned Data to PC Using the Operation Panel of the Machine