Canon mx860 - Manual (Page 79)

Advanced Guide Troubleshooting
Contents > Faxing > Sending Faxes
Sending Faxes
This section describes the operation to send a fax with the Numeric buttons and to register the
recipient's numbers to the one-touch speed dial and send a fax. For other operations, refer to the on-
screen manual:
Advanced Guide .
Sending a Fax with the Numeric Buttons
Redialing the Number Dialed with the Numeric Buttons
Sending a Fax with the One-Touch Speed Dial
Registering Recipient's Numbers to the One-Touch Speed Dial
Adjusting the Sending Quality
Note
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is
connected through a PBX or other telephone switching systems, you have to dial the outside line
access number first, and then the number of the party you are calling.
Sending a Fax with the Numeric Buttons
1.
Preparing for sending a fax.
(1) Make sure that the power is turned on.
See Operation Panel .
(2) Load a document on the Platen Glass or in the ADF.
See Loading Originals .
Important
When sending a double-sided document, set the document on the Platen Glass. You
cannot scan double-sided documents from the ADF.
Note
For details on the types and conditions of document which you can fax, see Originals You
Can Load .
(3) Press the FAX button.
The fax standby screen will appear.
(4) Adjust the image quality (fax resolution) or density (scan contrast) as necessary.
See Adjusting the Sending Quality .
2.
Sending the fax.
When the document was loaded on the Platen Glass:
(1) Use the Numeric buttons to dial the recipient's number.
Page 79 of 997 pages Sending Faxes