Canon mx860 - Manual (Page 762)

Power lamp on the printer flashes twice. When the Bluetooth unit is properly attached to
the printer without the Power lamp, the
COPY button on the printer flashes twice.
Removing the Bluetooth Unit from the Printer
Remove the Bluetooth unit from the Direct Print Port of the printer in accordance with the following
procedure.
1. Remove the Bluetooth unit from the Direct Print Port of the printer.
Important
Make sure that the lamp on the Bluetooth unit is neither lit nor flashing before you
remove the Bluetooth unit.
Important
Store the Bluetooth unit with the cap attached.
Page top
Page 762 of 997 pages Attaching to and Removing from the Printer