Canon mx860 - Manual (Page 715)

page. the fax or set the image quality (Fax resolution)
to a lower setting and resend it.
#005 No answer. When receiving a fax manually, the machine
could not detect the signals from the sender's
fax machine.
Contact the sender and have the sender
resend it, or set the machine to receive the fax
automatically.
#037 Memory is full. The machine could not receive a fax because
its memory is full.
Delete contents in memory, then ask the
sender to resend the fax. See
Deleting a
Document in Memory .
#046 Reception has been
rejected due to the
specified fax rejection
condition. Reception has been rejected because the fax
matches the fax rejection condition specified by
Fax reception reject. For details, see
Rejecting
Fax Reception .
STOP The Stop button was
pressed during reception. The Stop button was pressed to cancel
reception of the fax. Contact the sender and
have the sender resend it if necessary.
MULTI TX Report
This machine prints out a MULTI TX (transmission) report after sending the same document to
several destinations, confirming whether the transmission to all the recipients has been
completed successfully.
Page top
Page 715 of 997 pages Summary of Reports and Lists