Confirming the telephone line connection, Connecting various lines, Connecting to an xdsl – Canon mx860 User Manual

Page 20

Advertising
background image

Advanced Guide

Troubleshooting

Contents

>

Setting Up the Machine

> Confirming the Telephone Line Connection

Confirming the Telephone Line Connection

For the basic connection of the machine, refer to the printed manual: Getting Started. This guide
describes other typical connections.
The machine cannot send/receive faxes if the connection is incorrect. Connect the machine correctly.

Connecting Various Lines
Setting the Telephone Line Type

Important

If the Power Disconnects Unexpectedly
If there is a power failure or if you accidentally disconnect the power plug, the date/time settings as
well as all documents stored in memory will be lost. The settings for user data such as one-touch

speed dial, coded speed dial, group dial, and rejected numbers will be retained.

If the power disconnects, the following will apply:

You will not be able to send or receive faxes, make copies, or scan originals.
When you are connecting the telephone or answering machine, whether or not you can use it

depends upon your telephone line, telephone, or answering machine.

Connecting Various Lines

These are examples and could not be guaranteed to suit every connecting condition. For details, refer to
the instruction manual supplied with the network device (control devices such as an xDSL (Digital
Subscriber Line) modem or terminal adapter) you are connecting to this machine.

Note

xDSL is the generic term for the high speed digital communication technology with telephone line

such as ADSL/HDSL/SDSL/VDSL.

Connecting a Telephone or Answering Machine via a Computer

(A) Computer
(B) Telephone or answering machine
(C) Analog line

Note

Before connecting a telephone or answering machine, remove the Telephone connector cap.

For users in the UK

If the connector of the external device cannot be connected to the jack on the machine, you will need
to purchase a B.T. adapter to connect as follows:
Attach the B.T. adapter to the modular cable connecting the external device, then connect the B.T.

adapter to the

(External device) jack.

Connecting to an xDSL

Page 20 of 997 pages

Confirming the Telephone Line Connection

Advertising