ITC Avoximeter 1000E Whole Blood Oximeter - Manual (Page 24)

ITC AVOXimeter 1000E Operator’s Manual
18
Specifying Mandatory Entry of User ID and/or Patient ID
A User ID and/or Patient ID can be entered for any test. The User ID and/or Patient ID will be
included in the results record for tests that are run.
The instrument can be configured so that a valid numeric User ID must be entered before a test
result will be displayed. If this option is enabled, the user is prompted to enter (or verify, if it was
previously entered) the User ID after the test has started. If a valid User ID is not entered, the
instrument locks until a valid User ID is entered.
Enabling the Requirement to Enter a User ID:
Important: The User ID for the “QA User” must be entered in order to enable
the requirement to enter a User ID. See page 21 for details.
1. Display the “User and Patient ID” menu (a submenu of , “Data Management,”
see page 8).
2. Press followed by to display the current User ID setting:
3. Press followed by . A confirmation prompt is displayed, and the “User
ID” menu is displayed:
4. If needed, review the list of authorized users, add or delete authorized users, or
print the user list (see below).
5. Press to display the “Data Management” menu.
Disabling the Requirement to Enter a User ID:
Important: The User ID for the “QA User” must be entered in order to disable
the requirement to enter a User ID. See page 21 for details.
1. Display the “User and Patient ID” menu (a submenu of , “Data Management,”
see page 8).
2. Press followed by to display the current User ID setting:
3. Press followed by . A confirmation prompt is displayed, and the “User
and Patient ID” menu is again displayed.