Warning – Combi 8040 User Manual
Page 19
18
Section 9 - Installation of Infant Car Seat in Vehicle
•
Use only in a rear-facing position when using this infant car seat in a vehicle.
•
Secure this child restraint with the LATCH System or a vehicle seat belt as shown in this
manual.
•
LATCH belt or vehicle seat belt must stay tightly adjusted around car seat or base at all
times. If LATCH belt or vehicle seat belt does not stay tight, read the vehicle owner’s
manual and “Vehicle Seat Belts” section in this manual.
•
Rear-facing car seat must be properly reclined:
- Too reclined can result in injury or ejection.
- Too upright can result in breathing difficulties.
•
After installing infant car seat in base, lift car seat to be sure it is securely locked.
WARNING
DEATH or SERIOUS INJURY can occur
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 19