Combi 8040 - Manual (Page 40)

Changing Shoulder Harness Length:
1. Buckle harness and chest clip.
2. From front of car seat, loosen harness straps by pressing
harness adjuster lever, , and pulling harness straps out,
(fig. d).
3. From back of car seat, remove both harness adjustment
loops from metal harness plate (fig. e).
4. To lengthen shoulder harness:
- Re-attach metal harness plate in
lower adjustment loops on shoulder
harness straps (fig. f).
To shorten shoulder harness:
- Re-attach metal harness plate in
upper adjustment loops on shoulder
harness straps.
5. Check that loops are completely in slots
of metal harness plate, and under tabs
on both sides (fig. f).
3
4
39
(fig. d)
Shoulder
Harness
Adjuster
(Under
Adjuster
Cover )
4
3
(fig. e)
Shoulder
Harness
Loop
Metal
Harness Plate
(fig. f) Tab
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 40