Combi 8040 - Manual (Page 48)

Belts Forward of Seat Bight
47
Vehicle seat belts located forward of seat bight
(fig. a & b) may not securely hold car seat. Check
vehicle owner’s manual or see vehicle dealer for
car seat installation requirements.
• If seating position is approved for use with car seat,
install car seat and check for secure installation by
pulling car seat front to back. If car seat slides
forward or vehicle seat belt does not stay tight,
DO NOT use these seat belts.
(fig. a)
Seat
Bight
Belt Forward
of Seat Bight
Buckle
Forward of
Seat Bight
Seat
Bight
(fig. b)
(fig. c)
Flip
Manually adjustable lap belts (fig. c) normally will hold a car seat tightly. However, in
some cases, the locking latch plate on some seat belts may slip and loosen if positioned
at a certain angle. If this happens, flip latch plate over (fig. c) and re-buckle. Test
installation again to see if lap belt stays tight. If not, move car seat to another seating
location.
Lap Belts - Manually Adjustable
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 48