Combi 8040 - Manual (Page 33)

32
Press down firmly on car seat to compress vehicle seat
cushion while tightening vehicle lap belt (fig. b).
Adjust recline using the recline indicator on the side of
car seat (fig. c). Line on recline indicator must be in green
striped zone.
If line is not in green striped zone, place a tightly rolled up
towel, blanket or firm foam (pool noodle) under end of car
seat contacting vehicle seat back.
If car seat can not be adjusted to locate the line in the green
striped zone:
1. Try a different seating position.
2. Do not use this infant car seat.
NOTE: Vehicle must be parked on horizontal surface
during this installation.
6
(fig. c)
Recline
Indicator
Green Striped
Zone
(fig. b)
5
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 33