Combi 8040 User Manual
Page 21
Carry handle should be kept in the carry position (see “Carry Handle Operation”
section).
Adjust recline using recline indicator on the side of car seat. Line on recline
indicator MUST be in green striped zone (fig. d).
If line is not in green striped zone, adjust base using the recline foot (see
“Base Adjustment” section), and recheck recline of car seat. Repeat until
recline indicator is in green striped zone.
If base can not be adjusted to locate the line in the green
striped zone:
1. Try a different seating position.
2. Do not use this infant car seat.
NOTE: Vehicle must be parked on flat, level surface during this installation.
Verify that LATCH belt or vehicle seat belt is still tightly adjusted around base.
(fig. d)
20
4
5
Recline
Indicator
Green
Striped
Zone
6
Line
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 21