Combi 8040 - Manual (Page 29)

Adjust recline of car seat. Line inside recline indicator on side of car seat MUST
be in green striped zone (fig. b). If line is not in green striped zone, adjust base
(see “Base Adjustment” section), and recheck recline of car seat. Repeat until
recline indicator is in the green striped zone.
If base can not be adjusted to locate the line in the green striped zone:
1. If necessary, place tightly rolled towel, pool noodle, or firm object
under recline foot to level car seat.
2. Try a different seating position.
3. Do not use this infant car seat.
NOTE: Vehicle must be parked on horizontal surface
during this installation.
Remove car seat from base.
4
5
28
(fig. b)
Recline
Indicator
Green
Striped Zone
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 29