Combi 8040 - Manual (Page 20)

Removal Of Infant Car Seat From Base:
Pull orange release lever and lift car seat from base (fig. a).
Attaching Infant Car Seat To Base:
Verify that there are no objects on top of base or between base
and infant car seat that will prevent proper latching of car seat.
- Verify lower anchor belt is routed or stored properly.
With child facing the rear of the vehicle, lower car seat into
base and push down on car seat to lock car seat into base
(fig. b).
Test to be sure car seat is locked in base. Lift on car seat
at top of seat back (fig. c) and at child’s feet .
Attachment Of Infant Car Seat To Base:
(fig. a)
1
Release
Lever
(fig. b) (fig. c)
1
2
3
19
1
2
1 2
1 2
1
2
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 20