Dell PowerVault 124T - Manual (Page 35)

Front Panel Administration: Dell PowerVault 124T DLT VS160 Autoloader User's Guide
file:///T|/htdocs/stor-sys/124T/en/124tvs16/admin.html[12/5/2012 10:26:03 AM]
The front panel menu has the following options:
To configure the Dell PowerVault 124T DLT VS160 autoloader, you must verify the setup of the following:
SCSI ID(s). For the autoloader, there is a single SCSI ID.
Magazine(s).
Ethernet IP address (if you are not using DHCP).
SNMP server IP address—only if SNMP is being used.
Time server IP address (or the time zone, date, and time, if configuring manually)—only if a time server is being used.
Control mode.
Security option.
Setting the SCSI ID
Each SCSI device attached to a server or workstation must have a unique SCSI ID. For the PowerVault 124T autoloader, you
need one SCSI ID.
To set the SCSI ID:
1. If the main menu is not already visible, press Enter.