Dell PowerVault 124T - Manual (Page 66)

Troubleshooting: Dell PowerVault 124T DLT VS160 Autoloader User's Guide
file:///T|/htdocs/stor-sys/124T/en/124tvs16/trouble.htm[12/5/2012 10:26:08 AM]
Drive TAflag[25]
Dual port Interface
Error
TapeAlert Log Entry:
0000008000000000
A redundant interface port on the
tape drive has failed.
Failure of one interface
port in a dual-port
configuration (i.e., Fibre
Channel).
Drive TAflag[26]
Cooling Fan Failure
TapeAlert Log Entry:
0000004000000000
A tape drive cooling fan has failed. Fan failure inside tape
drive mechanism or tape
drive enclosure.
Drive TAflag[27]
Power Supply Failure
TapeAlert Log Entry:
0000002000000000
A redundant power supply has failed
inside the tape drive enclosure.
Redundant PSU failure
inside the tape drive
enclosure or rack
subsystem.
Check the enclosure user's manual
for instructions on replacing the
failed power supply.
Drive TAflag[28]
Power Consumption
TapeAlert Log Entry:
0000001000000000
The tape drive power consumption is
outside the specified range.
Power consumption of
the tape drive is outside
specified range.
Drive TAflag[29]
Drive Maintenance
TapeAlert Log Entry:
0000000800000000
Preventive maintenance of the tape
drive is required.
The drive requires
preventative
maintenance (not
cleaning).
Check the tape drive user's
manual for device specific
preventive maintenance tasks.
Drive TAflag[30]
Hardware A
TapeAlert Log Entry:
0000000400000000
The tape drive has a hardware fault.
The drive has a hardware
fault that requires reset
to recover.
Eject the tape.
Reset the drive.
Restart the operation.
Drive TAflag[31]
Hardware B
TapeAlert Log Entry:
0000000200000000
The tape drive has a hardware fault.
The drive has a hardware
fault that is not
read/write related or
requires a power cycle to
recover.
Power cycle the tape drive.
Restart the operation.
Drive TAflag[32]
Interface
TapeAlert Log Entry:
0000000100000000
The tape drive has a problem with
the application client interface.
The drive has identified
an interface fault. Check the SCSI interface
cables, terminator, and all
connections.
Restart the operation.
Drive TAflag[33]
Eject Media
TapeAlert Log Entry:
0000000080000000
The operation has failed.
Error recovery action
Eject the tape or magazine.
Insert the tape or magazine
again.
Restart the operation.
The firmware download has failed Firmware download Obtain the correct firmware and